GMC Terrain: Front Wiper Blade Replacement
To replace the front wiper blades:
1. Lift the wiper arm from the windshield until no further movement is possible.
2. Press the square button on the top side, at the end of the wiper arm, and pull the wiper blade out of the end of the wiper arm.
3. Install the wiper blade connector by sliding into the end of the wiper arm until the square button on the wiper blade clicks into place with the wiper arm.
4. Place the wiper arm with the wiper blade in place back on the windshield.
Wiper Blade Replacement
Windshield wiper blades should be inspected for wear and cracking. See Maintenance
Schedule on page 11‑3 for more information.
Replacement blades come in different types and are removed in di ...
Rear Wiper Blade Replacement
The rear wiper blade and wiper arm have a cover for protection. The cover must
be removed before the wiper blade can be replaced. To remove the cover:
1. Slide a plastic tool under the cover and ...
See also:
Emission control information label
The emission control information label is attached
to the underside of the hood as shown. ...
Glove Box
Glove Box
To open the glove box, pull the latch lever. To close it, push the lid until
it latches securely. If a lock is equipped on the latch lever, lock the glove box
by inserting the key and ...
Self-adjusting brakes
Your vehicle is equipped with self-adjusting
brakes.
The disc-type brakes self-adjust every time the
brake pedal is applied.
See a NISSAN dealer for a brake
system check if the brake pedal ...