Mercedes-Benz GLK-Class: Calling up a stored setting
If you want to move the seat from the fully reclined position to a stored seat position, first raise the backrest. The seat could otherwise be damaged.
Press and hold the relevant storage position button 1, 2 or 3 until the seat, steering wheel and exterior mirrors are in the stored position.
The setting procedure is interrupted as soon as you release the storage position button.
Storing settings
With the memory function, you can store up to three different settings, e.g. for three different people. The following settings are stored as a single memory preset: position of the seat, backr ...See also:
Daily checks
- Operation of lamps, horn, direction
indicators, wipers, washers and warning
lamps.
- Operation of seat belts and brakes.
- Look for fluid deposits underneath the
vehicle that might indicate a l ...
Paging
To learn how to page, refer to “Working with Automated
Systems”. Paging works properly except for pagers of
certain companies, which time out a little too soon to
work properly with the Ucon ...
Road Tire Installation
1. Mount the road tire on the axle.
2. Install the remaining lug nuts with the cone shaped
end of the nut toward the wheel. Lightly tighten the lug
nuts.
WARNING!
To avoid the risk of forcing ...