Jeep Liberty: Fog Lights — If Equipped
To activate the front fog lights, turn on the parking lights or the low beam headlights and pull out on the end of the multifunction lever.
Front Fog Light Control
NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the front fog lights.
Lights-On Reminder
If the headlights or parking lights are on after the ignition
is turned to the LOCK position, a chime will sound to
alert the driver when the driver’s door is opened. ...
Turn Signals
Move the multifunction lever up or down and the arrows
on each side of the instrument cluster flash to show
proper operation of the front and rear turn signal lights.
Turn Signal Control
NOTE: ...
See also:
Dialing a number from the phone book
If your mobile phone is able to receive calls, you can search for and dial a
number from the phone book in the audio system or COMAND at any time.
Copy the telephone book of the mobile phone int ...
Windshield Washer Fluid
Front and rear
(if equipped)
Check that there is washer fluid in the tank by looking at the washer fluid level
gauge which is attached to the cap of the washer fluid tank. If the fluid level
...
Preparing the cargo net
The cargo net can be used in two different positions (behind the B-pillar or
the C-pillar).
The brackets behind B-pillar : are required for the cargo compartment enlargement
(). The corresp ...
