Ford Escape: Fog lamp control (if equipped) - Headlamp control - Lights - Ford Escape Owner's ManualFord Escape: Fog lamp control (if equipped)

The headlamp control also operates the fog lamps. The fog lamps can be turned on when the headlamp control is in the and the high beams are positions and the high beams are not turned on.

Pull the headlamp control towards you to turn the fog lamps on. The fog lamp indicator light will illuminate.

High beams

    Autolamp control (if equipped)
    The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control. The autolamp system is factory programmed to keep the l ...

    High beams
    • Push the lever toward the instrument panel to activate. • Pull the lever toward you to deactivate. ...

    See also:

    Care of discs
    Proper Handling Handle your disc as shown. Do not drop the disc. Hold the disc so you will not leave fingerprints on the surface. If the surface is scratched, it may cause the pickup to skip ...

    Tread Wear Indicators
    Tread wear indicators are in the original equipment tires to help you in determining when your tires should be replaced. 1 — Worn Tire 2 — New Tire These indicators are molded into the b ...

    When to Check Power Steering Fluid
    The power steering fluid does not need to be checked unless there is a leak in the system or you hear an unusual noise. Have the system inspected and repaired if there is a fluid loss. ...