Range Rover Evoque: Entry gate programming

The technology of some entry gates requires you to press and re-press (cycle) the hand-held transmitter button every two seconds during programming.

Continue to press and hold the desired HomeLink button while you cycle your hand-held transmitter until the indicator lamp flashes rapidly.

READ NEXT:

 Information and assistance

It is recommended that when you sell or dispose of the vehicle, the programmed HomeLink buttons be erased for security purposes. For information on the range of available compatible products or

 Instrument panel

Instrument panel 1. Speedometer. 2. Driver Information Centre (message centre). 3. Tachometer. 4. Temperature gauge Serious engine damage can occur if the vehicle is driven while the engin

 Vehicle information and settings menu

Vehicle information and settings menu A number of vehicle features and display settings may be configured via the vehicle information and settings menu. To display and navigate through the vehic

SEE MORE:

 Intake Manifold

Removal NOTES: Removal steps in this procedure may contain installation details. Some illustrations may show the engine removed for clarity. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Disconnect the battery ground cable. Refer to: Specification

 Checking the tyre pressure after a repair

When driving the vehicle, if you experience vibrations, abnormal steering, or noises, reduce speed immediately. Drive with extreme caution and reduced speed to the first safe place to stop the vehicle. Visually examine the tyre, and check its pressure. If there are any signs of damage or

© 2011-2024 Copyright www.rrevoque.org