Mercedes-Benz GLK-Class: Engine oil viscosity
Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin.
Select an engine oil with an SAE (viscosity) classification suitable for the prevailing outside temperatures. The following table shows the correct SAE classification to be used. The low-temperature characteristics of engine oils can deteriorate significantly, e.g. as a result of aging, soot and fuel deposits. It is therefore strongly recommended that you carry out regular oil changes using an approved engine oil with the appropriate SAE classification.
Please bear the following in mind
The engine oils are matched to the performance of Mercedes-Benz engines and service intervals. You should therefore only use engine oils and oil filters that are approved for vehicles with mainten ...Refrigerant of the air-conditioning system
The air-conditioning system is filled with R134a refrigerant and a special PAG lubricant. Never use refrigerant R 12 (CFC) or mineral lubricants. Otherwise, you could damage the air-conditioni ...See also:
Using Operator Mode
Press the switch rearward and hold it, the Sky Sliderâ„¢
will open from the front and move toward the rear of the
vehicle.
Press the switch forward and hold it, the Sky Sliderâ„¢
will open from ...
Lowering the vehicle
WARNING
Pump up the collapsible spare wheel before lowering the vehicle. You could otherwise
damage the wheel rim.
Place the ratchet wrench onto the hexagon nut of the jack so that the
...
Downhill gradients
On long and steep gradients, you must reduce the load on the brakes by shifting
early to a lower gear. This allows you to take advantage of the engine braking effect
and helps avoid overheating ...