Kia Sportage: Engine oil and oil filter - Maintenance - Kia Sportage Owner's ManualKia Sportage: Engine oil and oil filter

Checking the engine oil level 1. Be sure the vehicle is on level ground. 2. Start

Checking the engine oil level 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan. 4. Pull the dipstick out, wipe it clean, and re-insert it fully.

WARNING - Radiator hose Be very careful not to touch the radiator hose when checking or adding the engine oil as it may be hot enough to burn you.

5. Pull the dipstick out again and check the level. The level should be between F and L.

If it is near or at L, add enough oil to bring the level to F. Do not overfill.

If it is near or at L, add enough oil to bring the level to F. Do not overfill. For 2.7L gasoline engine, use a funnel to refill the new oil comfortably. Use only the specified engine oil. (Refer to "Recommended lubricants or capacities" in section 8.) Changing the engine oil and filter Have engine oil and filter changed by an Authorized Kia Dealer according to the Maintenance Schedule at the beginning of this section.

    Engine compartment
    2.0L Gasoline Engine 1. Power steering fluid reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Air cleaner 5. Fuse box 6. Negative battery terminal 7. Radiator cap 8. Positive batt ...

    Engine cooling system
    The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once ...

    See also:

    Pregnant women
    NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder ...

    Starting a disabled vehicle using a starting aid
    To start the vehicle using a starting aid or a slave battery, follow the instructions in the sequence given. 1. Connect the positive (Red) booster cable to the positive (+) battery terminal of the ...

    Keypads
    Keypads in the steering wheel 1 Cruise control, see page 152. Adaptive cruise control*, see page 154. 2 Infotainment controls, see page 207. ...