Suzuki Grand Vitara: Engine Hood
Engine Hood
To open the engine hood: 1) Pull the hood release handle located on the outboard side of the driver’s side of the instrument panel. This will disengage the engine hood lock halfway.
2) Push the under-hood release lever sideways with your finger, as shown in the illustration. While pushing the lever, lift up the engine hood.
3) Continue to lift up the hood until it is high enough to support with the prop rod.
To close the engine hood: 1) Lift the hood up slightly and remove the prop rod from the hole. Put the prop rod back to the holding clip. 2) Lower the hood close to the bumper, then let it drop down. Make sure the hood is securely latched after closing.
WARNING: Make sure the hood is fully closed and latched before driving. If it is not, it can fly up unexpectedly during driving, obstructing your view and resulting in an accident.
Sunroof (if equipped)
You can tilt or slide the sunroof by operating the “TILT” part of the sunroof switch or the “SLIDE” part of the sunroof switch when the ignition switch is in the “ON” position. There i ...Cup Holder and Storage Bin (if equipped)
Cup holders and a storage bin are provided as shown. To access a bin, push the release button. To use the console bin, pull the lever up and open the lid. To use the rear cup holders, open th ...See also:
Vehicle security alarm
The Vehicle Security Alarm monitors the vehicle doors,
liftgate, and ignition for unauthorized operation. When
the Vehicle Security Alarm is activated, the alarm provides
both audible and visual ...
Cupholders
There are two cupholders for the front seat passengers,
located in the center console.
Front Cupholders
The rear passengers have cupholders at the rear of the
center console.
Rear Cuphold ...
USB Flash Memory Device Error Messages
If you see an error message on the
audio display while playing a USB
flash memory device, find the
solution in the chart to the right. If
you cannot clear the error message,
take your vehicl ...