Subaru Forester: Engine coolant - Specifications - Specifications - Subaru Forester Owner's ManualSubaru Forester: Engine coolant

NOTE
Each quantity indicated here is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors.

For the checking, adding and replacing procedure, or other details, refer to

For the checking, adding and replacing procedure, or other details, refer to “Cooling system”.

    Fluids
    NOTE Each quantity indicated here is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors. For the checking procedure, o ...

    Tires
    *: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the edge of the wheel nut wrench. If you have tightened the wheel nuts by yourself, have the tightening tor ...

    See also:

    Bulb specification chart
    Before attempting to replace a bulb, ensure that both the affected lamp and the vehicle's ignition, are turned off. If the circuit remains live, a short circuit can occur which may damage the ...

    Spare Tire Removal
    Fit the jack handle extension over the drive nut located in the rear cargo area inside the vehicle. Use the lug wrench to rotate the nut counterclockwise until the spare is on the ground with en ...

    Adjusting the lumbar support
    Vehicles without the memory function: You can adjust the contour of the front seats so as to provide optimum support for your back. Move adjustment lever 1 in the direction of the arrow until the ...