Range Rover Evoque: Electronic traction control (ETC)

ETC operates in conjunction with Dynamic Stability Control (DSC) and is designed to assist when one or more wheels have lost traction.

If a wheel loses traction, ETC will operate the brake on that wheel until it regains traction. The warning indicator will flash to inform the driver that ETC is operating.

READ NEXT:

 Adaptive dynamics

The adaptive dynamics continuously monitor road and driver inputs. It detects rough road and off road conditions, optimises the vehicle suspension settings to suit each surface type and adjusts co

 Terrain response

 Before driving off-road

Before venturing off-road, it is absolutely essential that inexperienced drivers become fully familiar with the vehicle's controls. In particular Hill Descent Control (HDC) and the Terrain Respons

SEE MORE:

 Front Seat Cushion Cover

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Prior to carrying out the step by step procedure below, Steps 2 and 3 must be followed for knowledge on how to correctly install and care for the seat cover. 2. 3. 4. If required, follow the steps below

 Headlamps

Moving the nearside headlamp unit to access bulbs; 1. Remove the two plastic fixings. 2. Pull the tube up to release from the air box. This will allow more room for manoeuvrability. 3. Remove the four grille fixings. 4. Remove the two retaining bolts. 5. At the rear of the headlamp unit, p

© 2011-2024 Copyright www.rrevoque.org