Suzuki Grand Vitara: Drive Belt
WARNING: When the engine is running, keep hands, hair, clothing, tools, etc. away from the moving fan and drive belts.
Make sure the drive belt tension is correct. If the belt is too loose, insufficient battery charging, engine overheating, poor power steering, poor air conditioning or excessive belt wear can result. When you press the belt with your thumb midway between the pulleys, there should be a deflection according to the following chart. The belts should also be examined to ensure that they are not damaged. If you need to replace or adjust the belt have it done by your SUZUKI dealer.
Maintenance Recommended under Severe Driving Conditions
If the vehicle is usually used under the conditions corresponding to any severe condition code given below, it is recommended that applicable maintenance operation be performed at the particular i ...Engine Oil and Filter
Specified Oil (1) Preferred Use engine oil with the American Petroleum Institute Certified For Gasoline Engines “Starburst” symbol. Select the appropriate oil viscosity according to the above ...See also:
Operating Instructions - Radio Mode
NOTE: The ignition switch must be in the ON or ACC
position to operate the radio.
Power Switch/Volume Control (Rotary)
Push the ON/VOLUME control knob to turn on the
radio. Press the ON/VOLUME c ...
Replacing the rear window wiper blade
Removing the wiper blade
Remove the SmartKey from the ignition lock.
Fold wiper arm 1 away from the rear window until it engages.
Position wiper blade 2 at a right angle to wiper arm 1.
Ho ...
With radio mode selected
Press the “” button or “”
button briefly.
The radio will seek the next preset station
and stop on it.
Press the “” button or “”
button
continuously. The radio will seek the n ...