Mercedes-Benz GLK-Class: Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.
You should only select the defrosting function until the windshield is clear again.
- Turn the SmartKey to position 2 in the ignition lock.
- To activate: press the ¬ button. The indicator lamp in the ¬ button lights up.
The climate control system switches to the following functions:
- cooling with air dehumidification on
- high airflow
- high temperature
- air distribution to the windshield and front side windows
- air-recirculation mode off
- To switch off: press the button. The indicator lamp in the button goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Airrecirculation mode remains deactivated.
or
- Press the button. The indicator lamp in the button goes out. Airflow and air distribution are set to automatic mode.
or
X Turn temperature control 1 or 8 clockwise or counter-clockwise ().
or
- Press the or button.
Activating/deactivating the MONO function
This function is only available in vehicles for Canada. You can use the MONO function to adopt the temperature and air distribution settings on the driver's side for the front-passenger side. ...MAX COOL maximum cooling
The MAX COOL function is only available in vehicles for the USA. MAX COOL is only operational when the engine is running. When you activate MAX COOL, climate control switches to the following functi ...See also:
USB (Universal Serial Bus) devices (if so equipped)
This system supports various USB memory
sticks, USB hard drives and iPod® players.
There are some USB devices which may not be
supported with this system.
- Make sure that the USB device is con ...
Catalytic Converter
Catalytic Converter
The purpose of the catalytic converter is to minimize the amount of harmful pollutants
in your vehicle’s exhaust. Use of leaded fuel in vehicles equipped with catalytic
con ...
Installing a Child Seat with a Tether
A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seatback,
and the center seating positio ...