Subaru Forester: Cruise control indicator light - Warning and indicator lights - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: Cruise control indicator light

This light illuminates when the “CRUISE”

This light illuminates when the “CRUISE” main switch is pressed.

If you press the main switch button while turning the ignition switch “ON”, the cruise control function is deactivated and the “CRUISE” indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the “Acc” or “LOCK” position, and then turn it again to the “ON” position.

    High beam indicator light
    This light shows that the headlights are in the high beam mode. This indicator light also illuminates when the headlight flasher is operated. ...

    Cruise control set indicator light
    This light illuminates when vehicle speed has been set. ...

    See also:

    Warning Lights, Gauges, and Indicators
    Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could p ...

    Trailer Towing Weights (Maximum Trailer Weight Ratings)
    The following chart provides the maximum trailer weight ratings towable for your given drivetrain. When Towing Trailers With Gross Trailer Weight (GTW) Between 3,500 Lbs (1 588 kg) And 5,000 Lb ...

    When “No song” is displayed (type D audio)
    This message is displayed when no playable audio files are in the connected USB storage device/iPod®. Connect a USB storage device/iPod® that has playable audio files stored in it. ...