Nissan Rogue: Controls
Outside air circulation:
Push the air recirculation button to turn off the indicator light on the button. The air flow is drawn from outside the vehicle.
Air recirculation:
Push the air recirculation button to turn on the indicator light on the button. The air flow is circulated inside the vehicle.
Air flow control:
Turn the air flow control dial to change the air flow mode.
— Air flows from the center and side ventilators with maximum cooling (air conditioning).
(The air recirculation and A/C will be automatically turned on.) — Air flows from the center and side ventilators.
— Air flows from the center and side ventilators and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defroster and foot outlets.
— Air flows mainly from the defroster outlets.
- You can also select the middle position between and or between and .
- When the , or position is selected, the air recirculation mode cannot be turned on to prevent the windows from being fogged up.
Fan speed control:
Turn the fan speed control dial clockwise (HI) to increase the fan speed.
Turn the fan speed control dial counterclockwise (LO) to decrease the fan speed.
A/C (Air Conditioner) operation:
Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates.
Temperature control:
Turn the temperature control dial to set the desired temperature. Turn the dial between the middle and the right position to select the hot temperature. Turn the dial between the middle and the left position to select the cool temperature.
Manual air conditioner
1. Fan speed control dial 2. Temperature control dial 3. Air flow control dial 4. Air recirculation button 5. A/C (Air Conditioner) button 6. Rear window defroster button (See “Rear wi ...Heater operation
Heating: This mode is used to direct heated air to the foot outlets. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control ...See also:
Notice to utility vehicle and truck owners
Utility vehicles and trucks handle
differently than passenger cars in
the various driving conditions that
are encountered on streets,
highways and off-road. Utility
vehicles and trucks are not de ...
Electronic Roll Mitigation (ERM)
This system anticipates the potential for wheel lift by
monitoring the driver’s steering wheel input and the
speed of the vehicle. When ERM determines that the rate
of change of the steering w ...
Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the on position.
3. Start the engine.
4. Press the SETUP control to s ...