Jeep Liberty: Compass Display / ECO (Fuel Saver Mode) — If Equipped
The compass readings indicate the direction the vehicle is facing. Press and release the COMPASS button to display one of eight compass headings, the outside temperature, and audio information (if the radio is on)/ECO if the EVIC display is not already displaying this screen.
NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated temperature is displayed. Engine temperature can also affect the displayed temperature; therefore, temperature readings are not updated when the vehicle is not moving.
- ECO (Fuel Saver Mode) — If Equipped
- Automatic Compass Calibration
- Manual Compass Calibration
- Compass Variance
EVIC Main Menu
To step to each main menu feature press and release the
MENU button once for each step. A step from the last
item in the list will cause the first item in the feature list
to be displayed. The f ...
ECO (Fuel Saver Mode) — If Equipped
The ECO message will display below the outside temperature
in the EVIC display (if the audio system is on
the ECO indicator will override the audio information
display line) if the Display Fuel ...
See also:
Collision Warning
The radar sensor and the camera work
together to detect a pedestrian, stationary
vehicles and vehicles that are moving in the
same direction as your vehicle. If there is a risk
of collision wi ...
Limitations
NOTE
• The sound source (AM, FM1, Disc,
etc.) being played through the infotainment
system's speakers cannot be controlled
from the rear control panel.
• In order to select and play an ext ...
Tilt position
Tilt position, raised at the rear edge
1 Open (raise the rear edge of the front glass
section) by pressing the rear edge of the
control upward.
2 Close by pulling the rear edge of the control ...
