Nissan Rogue: Clearing the programmed information
Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds).
Programming trouble-diagnosis
If HomeLink® does not quickly learn the handheld transmitter information: - replace the hand-held transmitter batteries with new batteries. - position the hand-held transmitter with its batt ...Reprogramming a single HomeLink® button
To reprogram a HomeLink® Universal Transceiver button, complete the following. 1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed. 2. Wh ...See also:
When to Check
Check the tires once a month or more. Do not forget the compact spare tire, if
the vehicle has one. The cold compact spare should be at 420 kPa (60 psi). For additional
information regarding the c ...
Air inlet selection button
Air inlet selection button
ON position (recirculation): Interior air is
recirculated inside the vehicle. Push the
air inlet selection button to the ON position
for fast cooling with the air c ...
Eco active (green)
Eco active (green)
Illuminates when the Stop/Start
system is activated. The engine will
automatically switch off when the
vehicle comes to a stop, neutral is selected and
the clutch is fully re ...