Nissan Rogue: Choosing a language
You can interact with the Bluetooth® Hands- Free Phone System using English, Spanish or French.
To change the language, perform the following.
1. Push and hold the button for more than 5 seconds.
2. The system announces: “Push the PHONE SEND ( ) button for the hands-free phone system to enter the speaker adaptation mode or push the PHONE END ( ) button to select a different language.” 3. Push the button.
For information on speaker adaptation, see “Speaker Adaptation (SA) mode” later in this section.
4. The system announces the current language and gives you the option to change the language to Spanish (in Spanish) or French (in French). Use the following chart to select the language.
NOTE:
You must push the button or
the
button within 5 seconds to
change
the language.
5. If you decide not to change the language, do not push either button. After 5 seconds, the VR session will end, and the language will not be changed.
Getting started
The following procedures will help you get started using the Bluetooth® Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, refer to “List of voice comman ...Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Push the button on t ...See also:
Jump Starting
For more information about the vehicle battery, see Battery on page 10‑26.
Jump starting can be used on vehicles with run&-down batteries by using jumper
cables and another vehicle.
WARN ...
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF
in each shift lever position.
○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...
Starting your vehicle
Starting your vehicle
The remote control start system is activated
by pressing the “” button twice
within 3 seconds on your remote control
transmitter. The system will check certain
p ...