Hyundai Tucson: Checking the transaxle oil (manual) - Do-it-yourself maintenance - Hyundai Tucson Owner's ManualHyundai Tucson: Checking the transaxle oil (manual)

Transaxle lubricant in the manual transaxle

Transaxle lubricant in the manual transaxle should be checked at those intervals specified in the vehicle maintenance schedule in Section 5.

Recommended Oil

Use only HYUNDAI GENUINE PARTS MTF 75W/85 (API GL-4) or EQUIVALENT in the manual transaxle.

Manual Transaxle Oil Capacity

The oil capacity of the manual transaxle is 2.2 U.S. quarts (2.1 liters).

WARNING: It is always better to check the transaxle oil level when the engine is cool or cold. If the engine is hot, you should exercise great caution to avoid burning yourself on hot engine or exhaust parts.

To Check the Manual Transaxle Fluid Level To Check the Manual Transaxle Fluid Level

Park the car on level ground with the engine off. 1. Using a wrench of the correct size, loosen the oil filler plug by turning it counterclockwise and remove it with your fingers. 2. Use your finger or suitable tool to feel inside the hole. The oil level should be at its bottom edge. If it is not, check for leaks before adding oil. To refill the transaxle or bring the oil level up,add oil slowly until it reaches the proper level. Do not overfill. 3. Replace the plug and washer, screw it in with your fingers and then tighten securely with the wrench.

    Filling the washer reservoir
    The washer fluid reservoir supplies fluid to the front and rear washer systems. A good quality washer fluid should be used to fill the washer reservoir. The fluid level should be checked mor ...

    Checking the transaxle fluid (automatic)
    Transaxle fluid in the automatic transaxle should be checked at those intervals specified in the vehicle maintenance schedule in Section 5. NOTE: Automatic transaxle fluid is basically red co ...

    See also:

    Interior protection
    The interior protection feature of the full alarm system may be temporarily disabled via Alarm sensors in the Vehicle Settings menu. See 56, VEHICLE INFORMATION AND SETTINGS MENU. Note: If the in ...

    Dialing a number
    The system understands the digits zero to nine. These numbers can be spoken individually, in groups of several digits at a time, or the entire number can be given at once. Numbers above nine wi ...

    Memory Position Recall
    NOTE: • For vehicles equipped with an automatic transmission, the vehicle must be in PARK to recall memory positions. If a recall is attempted when the vehicle is not in PARK, a message will ...