Subaru Forester: Checking the fluid level
The automatic transmission fluid expands largely as its temperature rises; the fluid level differs according to fluid temperature.
Therefore, there are two different scales for checking the level of hot fluid and cold fluid on the level gauge.
Though the fluid level can be checked without warming up the fluid on the “COLD” range, it is recommended to check the fluid level when the fluid is at operating temperature.
Checking the fluid level when the fluid is hot
1. Drive the vehicle several miles to raise the temperature of the transmission fluid up to normal operating temperature; 158 to 1768F (70 to 808C) is normal. 2. Park the vehicle on a level sur ...See also:
Easy route
In Route options, Easy route can be turned On
or Off.
When On is selected, Easy route changes the
calculation parameters of Route 3 in order to
reduce:
- Junctions.
- Turns.
- Turns that cross ...
Using the “SET UP” menu (“Phone” menu)
■ Functions and operation procedures
To enter the menu of each function, press
and follow the steps below using
● Adding a new phone number
1. “Phone” → 2. “Phonebook” ...
Manual transmission operation (if equipped)
Using the clutch
Manual transmission vehicles have a starter interlock that prevents
cranking the engine unless the clutch pedal is fully pressed.
To start the vehicle:
1. Make sure the parkin ...