Nissan Rogue: Checking engine coolant level
Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level 2 , open the reservoir cap and add coolant up to the MAX level 1 . If the reservoir is empty, check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with coolant up to the filler opening and also add it to the reservoir up to the MAX level 1 .
If the cooling system frequently requires coolant, have it checked by a NISSAN dealer.
Engine cooling system
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and cool ...Changing engine coolant
Major cooling system repairs should be performed by a NISSAN dealer. The service procedures can be found in the appropriate NISSAN Service Manual. Improper servicing can result in reduced hea ...See also:
Seek in PTY (Program type) group (type A, B and C audio)
Type A and B audio:
Type C audio:
In the PTY selection mode, when the
preferred PTY group has been selected,
pressing the “SEEK” button “” or “”
seeks within that PTY group.
T ...
SCAN (only when connecting USB storage device)
Scan is operated in the same way a CD is
played. For details, refer to “Scan (type A,
B and C audio)”.
NOTE
When an iPod® is connected, you
cannot select the SCAN mode. ...
Ignition switch
Illuminated ignition switch (if equipped) Whenever a door is opened, the ignition
switch will be illuminated for your convenience, provided the ignition switch is
not in the ON position. The lig ...