Ford Escape: CHANGING THE TIRES - Roadside Emergencies - Ford Escape Owner's ManualFord Escape: CHANGING THE TIRES

If you get a flat tire while driving, do not apply the brake heavily.

Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road.

Note: The tire pressure monitoring system (TPMS) indicator light will illuminate when the spare tire is in use. To restore the full functionality of the monitoring system, all road wheels equipped with tire pressure monitoring sensors must be mounted on the vehicle.

Have a flat serviced by an authorized dealer in order to prevent damage to the TPMS sensors, refer to Tire pressure monitoring system (TPMS) in the Tires, Wheels and Loading chapter. Replace the spare tire with a road tire as soon as possible. During repairing or replacing of the flat tire, have the authorized dealer inspect the TPMS sensor for damage.

pressure monitoring system (TPMS) and should not be used. WARNING: The use of tire sealants may damage your tire pressure monitoring system (TPMS) and should not be used.

However, if you must use a sealant, the TPMS sensor and valve stem on the wheel must be replaced by an authorized Ford dealer.

in the Tires, Wheels and Loading chapter for important WARNING: Refer to Tire pressure monitoring system (TPMS) in the Tires, Wheels and Loading chapter for important information. If the tire pressure monitor sensor becomes damaged, it will no longer function.

Power distribution box
The power distribution box is located in the engine compartment. Refer to the Identifying components in the engine compartment section of the Maintenance and Specifications chapter for the location. ...

Dissimilar spare tire/wheel information
WARNING: Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. If you have a dissimilar spare tire/wheel, then it is intended for tempor ...

See also:

Radio operation
Radio (FM/AM) band select: Pushing the FM·AM radio band select button will change the band as follows: AM FM1 FM2 AM When the stereo broadcast signal is weak, the radio will automatical ...

A/T Selector Position Indicator (if equipped)
A/T Selector Position Indicator (if equipped) When the ignition switch is in the “ON” position, this indicator shows the selector position of automatic transmission. ...

Marker lines
The PAC system's lines 1 Marker line for a 1-foot (30-centimeter) zone behind the vehicle 2 Marker line for the clear back-up zone 3 "Wheel tracks" The solid line (1) indicates a zon ...