Volvo XC60: Cargo area cover
Installing the steel cargo grid
For information about the necessary tools and procedures for installing/removing the steel cargo grid, please refer to the assembly instructions that were included when the grid was purchased. ...Use
• Pull the cover over the cargo and hook it into the holes in the rear cargo area pillars. • To retract (roll up) the cover, release it from the holes and guide it toward the rear seat back ...See also:
Ultrasonic Parking Assist
For vehicles with the Ultrasonic Rear Parking Assist (URPA) system, it assists
the driver with parking and avoiding objects while in R (Reverse). URPA operates
at speeds less than 8 km/h (5 mph), ...
Coat hook
Coat hook
A coat hook is attached to each side of the
cargo area.
- Never hang anything on the coat
hook that might obstruct the
driver’s view or that could cause
injury in sudden ...
High/low beam change (dimmer)
High/low beam change (dimmer)
To change from low beam to high beam,
push the turn signal lever forward. When
the headlights are on high beam, the high
beam indicator light “” on the
c ...