Subaru Forester: Canceling the function for meter/gauge needle movement upon turning on the ignition switch - Meters and gauges - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: Canceling the function for meter/gauge needle movement upon turning on the ignition switch

Subaru Forester / Subaru Forester Owner's Manual / Keys and doors / Meters and gauges / Canceling the function for meter/gauge needle movement upon turning on the ignition switch

Type A
Type A

Type B
Type B

It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the “ON” position.

1. Turn the ignition switch to the “LOCK” or “Acc” position.

2. Press the trip knob to show or on the odometer/trip meter or display. on the odometer/trip meter display.

The display can be switched as shown in the following illustration by pressing the trip knob.

Type A:

*: or

*: , and or or, and cannot or be displayed when the ignition switch cannot be displayed when the ignition switch in the “ON” position.

Type B:

*: or

*: cannot be displayed when or the ignition switch is in the “ON” position. cannot be displayed when the ignition switch is in the “ON” position.

3. To change the current setting, press the trip knob for at least 2 seconds.

: Deactivated : Activated

NOTE : Deactivated

NOTE
- Your vehicle’s initial movement setting of the meter/gauge needles has been set for activation at the time of shipment from the at the time of shipment from the factory.

- It is not possible to cancel the initial movement setting of the meter/gauge needles when the ignition switch is in the “ON” position. Cancel the setting when the ignition switch is in the “LOCK” or “Acc” position.

    Combination meter illumination
    When the ignition switch is turned to the “ON” position, the various parts of the combination meter are illuminated in the following sequence: 1. Warning lights, indicator lights, meter ...

    Meter needles/gauge illumination setting (models with type A combination meter)
    When the setting is activated or deactivated, the meter needles and gauge illuminate and turn off as follows. Activated: When the driver’s door is opened while the ignition switch is in the ...

    See also:

    SIRIUS ID
    The SIRIUS ID (sometimes referred to as the Electronic Serial Number or ESN) is required when contacting the Sirius Call Center. It is used to activate your account and when making any account ...

    Satellite Antenna
    To ensure optimum reception, do not place items on the roof around the rooftop antenna location. Metal objects placed within the line of sight of the antenna will cause decreased performance. La ...

    Adjustable Upper Shoulder Belt Anchorage
    In the front seating positions, the shoulder belt can be adjusted upward or downward to position the belt away from your neck. Press the release button to release the anchorage, and then move it ...