Subaru Forester: Brake pad and lining - Breaking-in of new brake pads and linings - Replacement of brake pad and lining - Maintenance and service - Subaru Forester Owner's ManualSubaru Forester: Brake pad and lining

While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake pedal lightly. Repeat this five or more times.

    Breaking-in of new brake pads and linings
    When replacing the brake pad or lining, use only genuine SUBARU parts. After replacement, the new parts must be broken in as follows. ...

    Parking brake lining
    1. Drive the vehicle at a speed of approximately 22 mph (35 km/h). 2. With the parking brake release button pushed in, pull the parking brake lever SLOWLY and GENTLY (pulling with a force of ...

    See also:

    Rolling code programming
    Note: Programming the rolling code garage door opener involves time-sensitive actions. Read the entire procedure prior to beginning so you will know which actions are time-sensitive. If you do not f ...

    For cold and snow weather
    Ventilation slots The ventilation slots in front of the windscreen should be brushed clear after heavy snowfall so that the operation of the heating and ventilation systems will not be impaired. ...

    To decrease the speed (by button)
    To decrease the speed (by button) Push the “SET/COAST” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be ...