Mercedes-Benz GLK-Class: Belt warning for the driver and front passenger - Seat belts - Occupant safety - Safety - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Belt warning for the driver and front passenger

Mercedes-Benz GLK-Class / Mercedes-Benz GLK-Class Owner's Manual / Safety / Occupant safety / Seat belts / Belt warning for the driver and front passenger

Regardless of whether the driver and front passenger have fastened their seat belts already, the lamp lights up for 6 seconds after every engine start. It then goes out if the driver seat belt warning lamp lights up for 6 seconds after every engine start. It then goes out if the driver and the front passenger have fastened their seat belts.

If the driver's seat belt is not fastened after the engine is started, an additional warning tone will sound. The warning tone goes out after approximately six seconds or once the driver's seat belt is fastened.

If the driver or front passenger have not fastened their seat belt after 6 seconds and the doors are closed, the belt warning lamp lights up. seat belt warning lamp lights up.

  • until the driver or the front passenger have fastened their seat belts
  • if a vehicle speed of 15 mph(25 km/h) is exceeded once, a warning tone with increasing intensity sounds additionally for a maximum of 60 seconds or until the driver or front passenger have fastened their seat belts.

If the driver or front passenger undo their seat belts during the journey, the the warning tone sounds again. seat belt warning lamp lights up and the warning tone sounds again.

The warning tone ceases even if the driver or front passenger have still not fastened their seat belt after 60 seconds. The but continues to be lit. seat belt warning lamp stops flashing but continues to be lit.

Once the vehicle is stationary, the warning tone is reactivated and the again if the vehicle speed exceeds 15 mph(25 km/h) once. seat belt warning lamp starts to flash again if the vehicle speed exceeds 15 mph(25 km/h) once.

The goes out if: seat belt warning lamp only goes out if:

  • both the driver and the front passenger have fastened their seat belts.

or

  • the vehicle is stationary and a door is open.

seat belt warning lamp, see "Warning For more information on the and indicator lamps in the instrument cluster, seat belt" (). seat belt warning lamp, see "Warning and indicator lamps in the instrument cluster, seat belt" ().

    Releasing seat belts
    Press release button 4() and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped ...

    Emergency Tensioning Devices, belt force limiters
    The front seat belts and the outer seat belts in the rear are equipped with ETDs and seat belt force limiters. The ETDs tighten the seat belts in an accident, pulling them close against the body. ...

    See also:

    SRS side airbag and SRS curtain airbag
    The SRS side airbag is stored in the door side of each front seat seatback, which bears an “SRS AIRBAG” label. In a moderate to severe side impact collision, the SRS side airbag on the im ...

    Automatic air conditioner
    1. Air flow control dial 2. Temperature control dial 3. Fan speed control dial 4. Rear window defroster button (See “Rear window and outside mirror defroster switch” in the “2. Instrum ...

    Examples of the types of accidents in which it is possible that the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will deploy.
    Only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags may be activated when the vehicle sustains a hard impact in the undercarriage area from ...