Subaru Forester: Before checking or servicing in the engine compartment
- Always stop the engine and set the parking brake firmly to prevent the vehicle from moving.
- Always let the engine cool down.
Engine parts become very hot when the engine is running and remain hot for some time after the engine is stopped.
- Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot engine components.
This may cause a fire.
- Always remove the key from the ignition switch. When the ignition switch is in the “ON” position, the cooling fan may operate suddenly even when the engine is stopped.
- Before performing any servicing on a vehicle equipped with a remote engine start system (a dealer option) temporarily place that system in the service mode to prevent it from unexpectedly starting the engine.
Maintenance precautions
When maintenance and service are required, it is recommended that all work be done by an authorized SUBARU dealer. If you perform maintenance and service by yourself, you should familiarize you ...When checking or servicing in the engine compartment (non-turbo models)
- Do not contact the belt cover while checking the components in the engine compartment. Doing so may cause your hand to slip off the belt cover and result in an unexpected injury. - D ...See also:
Vehicle Identification Number (VIN) plate
The vehicle identification number plate is attached
as shown. This number is the identification
for your vehicle and is used in the vehicle
registration. ...
SYNC (if equipped)
Your vehicle may be equipped with SYNC , a hands-free communications
and entertainment system with special phone and media features. For
more information, please refer to the SYNC supplement or to t ...
Alternative engine oil
If the SUBARU approved oil is unavailable, the following alternative oil can
be used.
NOTE
Each quantity indicated here is only a guideline. The necessary quantity for
replacement may differ sl ...