GMC Terrain: Automatic Transmission Shift Lock Control Function Check - Vehicle Checks - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: Automatic Transmission Shift Lock Control Function Check

GMC Terrain / GMC Terrain Owner's Manual / Vehicle Care / Vehicle Checks / Automatic Transmission Shift Lock Control Function Check

WARNING

When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.

2. Firmly apply the parking brake. See Parking Brake on page 9‑33.

Be ready to apply the regular brake immediately if the vehicle begins to move.

3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service.

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. ○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...

    See also:

    Turn signals
    High-beam headlamps ight turn signal High-beam flasher Left turn signal To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow 2 ...

    Reformulated Gasoline
    Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline.” Reformulated gasolines contain oxygenates, and are specifically blended to reduc ...

    Loading Discs in the In-dash Disc Changer
    Your vehicle’s in-dash disc changer holds up to six discs. 1. Press the LOAD button until you hear a beep and see ‘‘LOAD’’ on the display. To load only one CD, press and release th ...