Jeep Liberty: Automatic Transmission - Towing Tips - Trailer Towing - Starting And Operating - Jeep Liberty Owner's ManualJeep Liberty: Automatic Transmission

The “DRIVE” range can be selected when towing. However, if frequent shifting occurs while in this range, activate the TOW/HAUL feature. Refer to “Automatic Transmission” in “Starting and Operating” for further information.

NOTE: Using the TOW/HAUL feature while operating the vehicle under heavy operating conditions will improve performance and extend transmission life by reducing excessive shifting and heat build up. This action will also provide better engine braking.

If you REGULARLY tow a trailer for more than 45 minutes of continuous operation, then change the automatic transmission fluid and filter according to the interval specified for “police, taxi, fleet, or frequent trailer towing.” Refer to “Maintenance Schedule” for the proper maintenance intervals.

    Towing Tips
    Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. ...

    TOW/HAUL
    To reduce potential for automatic transmission overheating, press the TOW/HAUL button when driving in hilly areas or select the 2 range on more severe grades. Refer to “Automatic Transmission ...

    See also:

    Rear Window Wiper/Washer Switch
    Rear Window Wiper/Washer Switch To turn the rear wiper on, twist the rear wiper switch on the end of the lever forward to the “ON” position. If your vehicle is equipped the “INT” positio ...

    Engine Oil Messages
    CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System. See Engine Oil Life System on page 10&# ...

    Reporting safety defects (U.S.A.)
    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTS ...