Jeep Liberty: Automatic Compass Calibration
This compass is self-calibrating, which eliminates the need to set the compass manually. When the vehicle is new, the compass may appear erratic and the EVIC will display “CAL” until the compass is calibrated. You may also calibrate the compass by completing one or more 360–degree turns (in an area free from large metal or metallic objects) until the “CAL” message displayed in the EVIC turns off. The compass will now function normally.
NOTE: A good calibration requires a level surface and an environment free from large metallic objects such as buildings, bridges, underground cables, railroad tracks, etc.
ECO (Fuel Saver Mode) — If Equipped
The ECO message will display below the outside temperature in the EVIC display (if the audio system is on the ECO indicator will override the audio information display line) if the Display Fuel ...Manual Compass Calibration
If the compass appears erratic and the “CAL” indicator does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: 1. Start the engine. Leave ...See also:
Fastening seat belts
WARNING
According to accident statistics, children are safer when properly restrained
on the rear seats than on the front-passenger seat. Thus, we strongly recommend
that children be placed ...
Headlamp cleaning system
The headlamps are cleaned automatically if the "Wipe with washer fluid" function
is operated ten times while the lights are on and the engine is running (). When you switch off the ignitio ...
Jacking And Tire Changing
WARNING!
• Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changi ...