Subaru Forester: Auto-store (type D audio)
Using the Auto-store function, you can
automatically store 6 stations on the
current waveband (FM-AS or AM-AS) by
pressing the 
button for 1.5 seconds
or longer. Use Auto-store to quickly find
the strongest stations, for example when
traveling through different reception areas.
NOTE
- When the HD Radio function is
turned on, Auto-store cannot be used
while receiving the broadcasting station
with SPS (Supplemental Program
Service).
- When you use Auto-store, the new stations replace any stations previously stored.
- Interrupting Auto-store: If you accidentally
press the (Auto-store)
button, you can cancel the Auto-store
function before it has been completed
as follows.
– switching to the other source mode
– pressing the button
– switching to the other band
– turning the “TUNE/TRACK/CH” dial
– pressing the “SCAN” button
Selecting preset stations
1. Press the “FM/AM” button to select
FM1, FM2, FM3 (type A, B and C audio)/
FM-AS (type D audio), AM or AM-AS (type
D audio) reception.
2. Press the preferred preset button
(from
to
...
Displaying and selecting preset stations (type D audio)
1. Press the button for 1.5
seconds
or longer during AM/FM reception to
display the radio screen.
2. Operate the “TUNE/TRACK/CH” dial
to select the stations. ...
See also:
Set-up
Select Set-up from the Home menu.
Set-up is divided into categories:
- Screen
- System
- Voice ...
How to Check
Use a good quality pocket-type gauge to check tire pressure. Proper tire inflation
cannot be determined by looking at the tire. Check the tire inflation pressure when
the tires are cold, meaning t ...
Important Safety Precautions
To eliminate potential hazards, read
the instructions before you begin,
and make sure you have the tools
and skills required.
Make sure your vehicle is parked
on level ground, the parking bra ...
