Jeep Liberty: Reset
• press the 
button.
• After the “Ready” prompt, and the following beep, say “Setup”, then “Reset”.
This will delete all phone pairing, phone book entries, and other settings in all language modes. The System will prompt you before resetting to factory settings.
Voice Training
For users experiencing difficulty with the system recognizing
their voice commands or numbers, the Uconnect™
Phone Voice Training feature may be used. To enter this
training mode, follow one o ...
Voice Command
• For best performance, adjust the rearview mirror to
provide at least 1⁄2 in (1 cm) gap between the overhead
console (if equipped) and the mirror.
• Always wait for the beep before spe ...
See also:
Tire section names
1 Bead
2 Sidewall
3 Shoulder
4 Tread
5 Belt
6 Inner liner
7 Reinforcing rubber
8 Carcass
9 Rim lines
10 Bead wires
11 Chafer ...
Passenger compartment fuse panel
The fuse panel is located on the
right-hand side of the center
console, by the instrument panel.
Remove the panel cover to access
the fuse cover. Press the tabs on the
top and bottom of the fus ...
If Steam is Coming from the Engine Compartment
WARNING
Steam from an overheated engine can burn you badly, even if you just open the
hood. Stay away from the engine if you see or hear steam coming from it. Just turn
it off and get everyone aw ...
