Subaru Forester: Arming the system
If you have accidentally triggered the alarm system
To stop the alarm Do any of the following operations: - Press any button on the remote transmitter. - Turn the ignition switch to the “ON” position. ...To arm the system using remote transmitter
1. Close all windows and the moonroof (if equipped). 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood is locked. ...See also:
Parking brake
Apply the parking brake whenever
the vehicle is parked. To set the
parking brake, press the parking
brake pedal down until the pedal
stops.
The BRAKE warning lamp in the
instrument cluster ill ...
Add-on Electrical Equipment
The OnStar system is integrated into the electrical architecture of the vehicle.
Do not add any electrical equipment. See Add-On Electrical Equipment on page 9‑64.
Added electrical equipment ...
Continuously Variable Transmission (CVT) fluid
- Use only Genuine NISSAN CVT Fluid
NS-2. Do not mix with other fluids.
- Using transmission fluid other than
Genuine NISSAN CVT Fluid NS-2
will damage the CVT, which is not
covered by th ...