Volvo XC60: Applying the electric parking brake
Parking brake control
1. Press firmly on the brake pedal.
2. Push the control.
> The 
symbol in the instrument
panel flashes while the parking bake is
being applied, and glows steadily when
the parking brake has been fully applied.
3. Release the brake pedal and ensure that the vehicle is at a standstill.
4. When the vehicle is parked, the gear selector must be in position P.
NOTE
• In an emergency the parking brake can
be applied when the vehicle is moving
by holding in the control. Braking will be
interrupted when the accelerator pedal
is depressed or the control is released.
• An audible signal will sound during this
procedure if the vehicle is moving at
speeds above 6 mph (10 km/h).
Low battery voltage
If the battery voltage is too low, the parking
brake cannot be applied or released. Connect
an auxiliary battery if the battery voltage is too
low, see page 114. ...
Parking on a hill
• If the vehicle is pointing uphill, turn the front
wheels so that they point away from the
curb.
• If the vehicle is pointing downhill, turn the
front wheels so that they point toward the ...
See also:
Important notes
In order to prevent the vehicle's battery from discharging, the interior lighting
functions are automatically deactivated after some time except for when the SmartKey
is in position 2 in the i ...
Exhaust check
WARNING
Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains
carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death.
Do not run the engi ...
Conditions and operation of the front passenger occupantclassification
system
■ Adult*1
■ Child*3 or child restraint system*4
■ Unoccupied
■ There is a malfunction in the system
*1: The system judges a person of adult size as an adult. When a ...
