Mitsubishi Outlander: Antenna
Roof antenna
To remove
Turn the pole (A) anticlockwise.
To install
Screw the pole (A) clockwise into the base (B) until it is securely retained.
NOTE:
● Be sure to remove the roof antenna in the following cases: • When going into an
automatic car wash. • When placing a car cover over the vehicle.
● Before driving into a structure that has a low ceiling, fold down the antenna
to prevent it from hitting the ceiling.
Handling of compact discs
● Use only the type of compact discs that have the mark shown in the illustration below (playback of CD-R or CDRW discs may cause problems). ● The use of special shaped, damaged c ...Digital clock*
Automatic mode and manual mode is available for digital clock adjustment: Select the automatic mode or the manual mode by performing the following operations: 1. Press the PWR switch (A) to tur ...See also:
Body Lubrication
Locks and all body pivot points, including such items as
seat tracks, door hinge pivot points and rollers, liftgate,
tailgate, sliding doors and hood hinges, should be lubricated
periodically wi ...
Meter needles/gauge illumination setting (models with type A combination
meter)
When the setting is activated or deactivated,
the meter needles and gauge
illuminate and turn off as follows.
Activated:
When the driver’s door is opened while
the ignition switch is in the ...
Initialization
Items to initialize
The following items must be initialized for normal system operation
in cases such as after the battery is reconnected, or maintenance is
performed on the vehicle.
...