Volvo XC60: Adjusting the set speed
After a speed has been set, it can be increased or decreased by using the or buttons.
1. Press and hold down or until the vehicle reaches the desired speed.
> This will become the set speed when the button is released.
2. Press or for approximately a half second and release the button to increase or decrease vehicle speed by approximately 1 mph (1.6 km/h).
NOTE
• A temporary increase in speed by
pressing the accelerator pedal, for less
than 1 minute (e.g. when passing
another car), does not affect the current
cruise control setting. The vehicle will
automatically return to the previously
set speed when the accelerator pedal is
released.
• If one of the cruise control buttons is
kept depressed for more than approx.
1 minute cruise control is disengaged.
The engine must then be switched off in
order to reset cruise control.
Setting a speed
Use the or buttons set the vehicle's current speed. The set speed is shown in the display. NOTE Cruise control cannot be engaged at speeds below 20 mph (30 km/h). ...Automatic deactivation
Cruise control is automatically deactivated temporarily if one of the following occurs: • If the speed drops below approximately 20 mph (30 km/h). • When the brake pedal is depressed. • I ...See also:
Engine Oil Change
When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter
changed within the next 1 000 km/600 mi. If driven under the best conditions, the
engine oil life system might not ...
Introduction
Congratulations on selecting your new Chrysler Group
LLC vehicle. Be assured that it represents precision
workmanship, distinctive styling, and high quality - all
essentials that are traditional ...
To Enter Remote Start Mode
Press and release the REMOTE START button
on the RKE transmitter twice within five seconds.
The parking lights will flash and the horn
will chirp twice (if programmed). Then, the
engine will ...