Jeep Liberty: Adding Fluid - Transfer Case - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Adding Fluid

Fluid should be added only to fill hole until fluid begins to run out of the hole.

    Fluid Level Check
    The fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position. 1 — Fill Plug 2 — Drain Plug ...

    Draining Fluid
    First remove the fill plug (1), then the drain plug (2). Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 N·m). CAUTION! Do not over-tighten the plugs. You ...

    See also:

    Tire safety information
    Tire Markings 1 — U.S. DOT Safety Standards Code (TIN). 4 — Maximum Load. 2 — Size Designation. 5 — Maximum Pressure. 3 — Service Description. 6 — Treadwear, Traction and ...

    Speedometer/Odometer/Tripmeter/Brightness Control
    Speedometer/Odometer/Tripmeter/Brightness Control (1) Speedometer. (2) Odometer/Tripmeter. (3) Odometer/Tripmeter selector, Brightness control knob. Speedometer The speedometer indicates vehicl ...

    Video Screen Input Jack
    Each video screen is equipped with a video input jack to allow video cables to be connected from an auxiliary device such as a camcorder or a video game system. This signal will override any video ...