Volvo XC60: Activating/deactivating warning signals
The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on.
The audible warning signal can be activated/
deactivated by pressing MY CAR on the center
console control panel and going to Settings
Car settings
Driver support systems
Warning sound if risk of collision.
On and off
To switch Collision Warning on or off, press MY
CAR on the center console control panel and
go to Settings
Car settings
Driver
support systems
Collision Warning. If
Collision Warni ...
Setting a warning distance
This setting determines the distance at which
the visual and audible warnings are triggered.
Select Long, Normal or Short by pressing MY
CAR on the center console control panel and
going to Set ...
See also:
Garage Door Opener — If Equipped
HomeLink replaces up to three hand-held transmitters
that operate devices such as garage door openers, motorized
gates, lighting or home security systems. The
HomeLink unit is powered by your ve ...
Tire Chains
WARNING Do not use tire chains. There is not enough clearance. Tire chains used
on a vehicle without the proper amount of clearance can cause damage to the brakes,
suspension or other vehicle part ...
Before starting out on a trip
- Check that the vehicle and vehicle-tohitch
mounting are in good condition. If
any problems are apparent, do not tow the
trailer.
- Check that the vehicle sits horizontally
with the trailer ...
