Mercedes-Benz GLK-Class: Activating/deactivating the residual heat function
It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on the temperature that has been set.
The blower will run at a low speed regardless of the airflow setting.
If you activate the residual heat function at high temperatures, only the ventilation
will be activated. The blower runs at medium speed.
It is possible that the residual heat function may be activated automatically
an hour after the SmartKey is removed. The vehicle is then ventilated for 30 minutes
to dry the air-conditioning system.
- Turn the SmartKey to position 0 in the ignition lock or remove it.
- To activate: press the
button.
The indicator lamp in the button
lights up. - To switch off: press the
button. The indicator lamp in the
button goes out.
Residual heat is deactivated automatically:
- after about 30 minutes
- when the ignition is switched on
- if the battery voltage drops
- if the coolant temperature is too low
Activating/deactivating airrecirculation mode
You can deactivate the flow of fresh air if unpleasant odors are entering the
vehicle from outside. The air already inside the vehicle will then be recirculated.
WARNING
Fogged windows impair ...
See also:
Cargo area cover
...
Head Restraints
See page for important safety
information and a warning about
improperly positioning head restraints.
Your vehicle is equipped with head
restraints in all seating positions to
help protect yo ...
Changing the voice tag of the cell phone
1. Select the “CHANGE NAME” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Select the cell phone by operating the
...
