Volvo XC60: Activating DAC
Press MY CAR in the center instrument panel
and go to Car settings
Driver Alert and
select On. See page 133 for more information
on the menu system.
The function is activated when the vehicle exceeds a speed of 40 mph (65 km/h). The display will show level markings of 1–5 bars, where a low number of bars indicates erratic driving. A high number of bars indicates stable driving.
If the vehicle is being driven erratically, the driver will be alerted by an audible signal and the message Driver Alert, Time for a break is displayed. The warning will be repeated after a short time if the driving pattern remains the same.
WARNING
• An alert should be taken seriously since
it is sometimes difficult for a driver to
realize that he/she is fatigued.
• In the event of a warning or if the driver
feels fatigued, stop as soon as possible
in a safe place and rest.
Operating DAC
Certain settings can be made from the menu
system controlled from the center instrument
panel.
The current system status can be checked on
the trip computer’s display by using the buttons
o ...
See also:
Preparing the cargo net
The cargo net can be used in two different positions (behind the B-pillar or
the C-pillar).
The brackets behind B-pillar : are required for the cargo compartment enlargement
(). The corresp ...
Wheel replacement
When replacing wheels due, for example,
to damage, make sure the replacement
wheels match the specifications of the
wheels that are fitted as standard equipment.
Replacement wheels are availabl ...
Oil Change Required
Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Required” message
will flash in the EVIC display for approximately 10 seconds
after a single chime has so ...
