Nissan Rogue: Activating Around View Monitor
Selector lever operation:
- When the selector lever is shifted into the “R” (Reverse) position (1 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the rear view/bird’s-eye view screen B is displayed.
The screen B switches back to screenA when the selector lever is shifted out of the “R” (Reverse) position (2 ).
CAMERA button operation:
- When the CAMERA button is pushed (8 ) while a screen other than the Around View Monitor A is displayed, Around View Monitor is activated and the front view/ bird’s-eye view screen D is displayed.
How to switch the display
: Shift the selector/shift lever : Push the CAMERA button A : Original screen before the Around View Monitor is operated B : Rear view/bird-eye view screen C : Rear view/front-side view s ...Operations after activation
- When the rear view is displayed on the left side on the screen (B or C ), the view on the right side switches between the bird’seye view B and the front-side view C each time the CAMERA bu ...See also:
Automatic operation (if so equipped)
Automatic operation (if so equipped)
The automatic operation is available for the
switch that has an mark on its surface.
Type A: To fully open or close the window, push
down or pull up the s ...
Panic alarm
To activate: press button
1 for at least one second.
An alarm sounds and the exterior lighting flashes.
To deactivate: press button
1 again.
or
Insert the SmartKey into the ign ...
Keys
Your vehicle is equipped with two
Integrated Keyhead Transmitters
(IKTs). The key blade functions as a
programmed key which starts the
vehicle and unlocks/locks all the
doors. The transmitter por ...