Subaru Forester: Activating and deactivating the alarm system - Alarm system - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: Activating and deactivating the alarm system

To change the setting of your vehicle’s alarm system for activation or deactivation, do the following.

1. Disarm the alarm system. Refer to “Disarming the system”.

2. Sit in the driver’s seat and shut all doors and the rear gate.

3. Turn the ignition switch to the “ON” position.

4. Hold down the UNLOCK side of the driver’s power door locking switch, open the driver’s door within the following 1 second, and wait 10 seconds without releasing the switch. The setting will then be changed as follows.

If the system was previously activated:

The odometer/trip meter screen displays “AL oF” and the horn sounds twice, indicating that the system is now deactivated.

If the system was previously deactivated:

The odometer/trip meter screen displays “AL on” and the horn sounds once, indicating that the system is now activated.

NOTE
You may have the above setting change done by your SUBARU dealer.

    System operation
    The alarm system will give the following alarms when triggered. - The vehicle’s horn will sound for 30 seconds. - The turn signal lights will flash for 30 seconds. If any of the doors or th ...

    If you have accidentally triggered the alarm system
    To stop the alarm Do any of the following operations: - Press any button on the remote transmitter. - Turn the ignition switch to the “ON” position. ...

    See also:

    Tyres and wheels
    *Optional equipment. ...

    Engine Oil
    To ensure proper engine performance and long life, careful attention must be paid to engine oil. Following these simple, but important steps will help protect your investment: ○ Always use ...

    High beam assist
    This feature of the Xenon lighting automatically selects and deselects high beam, under specific conditions of road lighting and in the absence of other vehicle’s lights. The system is only acti ...