Mitsubishi Outlander: Accessory socket
CAUTION:
● Be sure to use a “plug-in” type accessory operating at 12 V and at 120 W or less.
When using more than one socket at the same time, make sure that the electrical
accessories are 12 V accessories and that the total power consumption does not exceed
120 W.
● Long use of the electric appliance without running the engine may run down the
battery.
● When the accessory socket is not in use, be sure to close the lid or install the
cap, because the socket might become clogged by foreign material and be short-circuited.
To use a plug-in type accessory, open the lid or remove the cap, and insert the plug in the accessory socket.
NOTE:
● Accessory sockets in 3 locations can be used at the same time. However, make sure
that the total power consumption does not exceed 120 W.
The accessory socket can be used while the ignition switch is in either the “ON” or “ACC” position.
Vanity mirror
The vanity mirrors are located on the back of the sun visor. ...
Interior lamps
1- Luggage room lamp 2- Room lamp (rear). 3- Map & room lamps (front). 4- Foot
lamps* P. 8-58.
NOTE:
● If you leave the lamps on without running the engine, you will run down the batt ...
See also:
Leather
Use only cleaning products
specifically
designed for use on leather. Do not use
solvents. Do not use chemical, alcohol,
or abrasive materials, as they will cause
rapid deterioration of the leat ...
Engine compartment
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or cause a fire.
If any electrical equipment does ...
License plate lamps
Switch off the lights.
Open the tailgate.
Press lug 2 of license plate lamp 1 in the direction of the arrow and
remove license plate lamp lens 1.
Remove license plate lamp lens 1.
Repl ...
