Jeep Liberty: Accessing The Storage Bin - Cargo Load Floor - Cargo Area Features - Understanding The Features Of Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Accessing The Storage Bin

NOTE: The spring-loaded latches that retain the storage bin cover to the cargo load floor should not be used as cargo tie-downs.

1. Flip the spring-loaded latch pull-loops up.

Cargo Load Floor Loops
Cargo Load Floor Loops

2. Pull the loops upward and twist them one-quarter turn so that they are parallel to the slots in the storage bin cover.

3. Lift the cover upward over the loops.

4. Turn over the cover and reinstall it.

NOTE: You can install the cover with either side facing upward.

5. With the cover seated in the floor, pull upward on loops and twist them one-quarter turn so that they are no longer parallel to the slots in the cover.

6. Flip the loops down.

WARNING!
A loose storage bin cover thrown forward in a accident or hard stop could endanger the occupants of the vehicle. Always latch the storage bin cover to the cargo load floor with the spring-loaded latches when not accessing the storage bin.

    Cargo Load Floor
    The cargo load floor system has a load capacity of 400 lbs (181 kg). The load floor has a built-in storage bin that can hold a variety of items. The underside of the storage bin cover also conta ...

    Cargo Tie-Down Hooks And Loops
    The tie-downs located on cargo area floor should be used to secure loads safely when the vehicle is moving. Cargo Tie-Down Hooks Cargo Tie-Down Loops Cargo tie-down loops are located on the t ...

    See also:

    Hdc operation
    With HDC engaged, standard descent speed will not exceed 20km/h (12.4mph). While the green warning lamp is continuously illuminated, HDC target speed can be modified using the cruise control steer ...

    Storing and Deleting Phone Numbers
    The system can store up to 30 phone numbers as name tags in the Hands&-Free Directory that is shared between the Bluetooth and OnStar systems. The following commands are used to delete and stor ...

    Programming A Rolling Code
    For programming garage door openers that were manufactured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is a ...