Ford Escape: Air filter - Maintenance and Specifications - Ford Escape Owner's ManualFord Escape: Air filter

Refer to scheduled maintenance information for the appropriate intervals for changing the air filter element.

When changing the air filter element, use only the air filter element listed. Refer to Motorcraft part numbers in this chapter.

personal burn injuries do not start your engine with the air WARNING: To reduce the risk of vehicle damage and/or personal burn injuries do not start your engine with the air cleaner removed and do not remove it while the engine is running.

Changing the air filter element

1. Release the clamps that secure the air filter housing cover.

• 2.5L I4 engine

• 3.0L V6 engine

• 3.0L V6 engine

2. Pull the air filter housing cover away.

2. Pull the air filter housing cover away.
3. Remove the air filter element from the air filter housing.
4. Wipe the air filter housing and cover clean to remove any dirt or debris and to ensure good sealing.
5. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover. This could cause filter damage and allow unfiltered air to enter the engine if not properly seated.
6. Replace the air filter housing cover and secure the clamps.

Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used.

    Checking and adding manual transmission fluid (if equipped)
    1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear. 3. Ensure the vehicle cannot move. 4. Clean the filler plug. 5. Remove the filler plug, located o ...

    Vehicle storage
    If you plan on storing your vehicle for an extended period of time (30 days or more), refer to the following maintenance recommendations to ensure your vehicle stays in good operating condition. ...

    See also:

    Fuses
    If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any elect ...

    2.5L I4 engine
    ...

    Modification and disposal of SRS airbag system components
    Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death o ...