Dodge Nitro: Engine block heater - Starting and operating - Dodge Nitro Owner's ManualDodge Nitro: Engine block heater

The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded three-wire extension cord.
• The engine block heater cord is found under the hood clipped to the heater line on the left side of the engine.

WARNING: Remember to disconnect the cord before driving. Damage to the 110-115 Volt AC electrical cord could cause electrocution.

Use the heater when temperatures below 0 °F (-18 °C) are expected to last for several days.

    Starting procedures
    Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. WARNING: Never leave children alone in a vehicle. Leaving children in a vehic ...

    Automatic transmission
    CAUTION: Damage to the transmission may occur if the following precautions are not observed: • Shift into PARK only after the vehicle has come to a complete stop. • Shift into or out of ...

    See also:

    Drinking and driving
    WARNING Drinking and driving and/or taking drugs and driving are very dangerous combinations. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgment. The ...

    Upholstery care
    Fabric Clean with soapy water or a detergent. For more difficult spots caused by oil, ice cream, shoe polish, grease, etc., use a clothing/fabric stain remover. Consult your Volvo retailer. Al ...

    Operation Instructions - Auxiliary Mode
    The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplif ...