Ford Escape: Stopping and securing the vehicle
1. Park on a level surface, set the
parking brake and activate hazard
flashers.
2. Place gearshift lever in P (Park)
(automatic transmission) or R
(Reverse) (manual transmission)
and turn engine off.
Dissimilar spare tire/wheel information
WARNING: Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death. If you have a dissimilar spare tire/wheel, then it is intended for tempor ...Removing the jack and tools
1. The jack and tools are located under the carpeted load floor. 2. Pull back the carpet away from the liftgate, and remove the hardboard cover. If your vehicle is equipped with a cargo managemen ...See also:
Temperature control
The temperatures on the
driver and passenger sides
can be set separately. When
the vehicle is started, the
most recent setting is
resumed.
NOTE
Heating or cooling cannot be speeded up by ...
Ignition Switch
Vehicle Without
Keyless Start System
The ignition switch has the following four positions:
LOCK
This is the normal parking position. It is the only position in which the key
can be removed. It ...
Steering wheel lock
[For vehicles equipped with the keyless operation system]. For information on
operations for vehicles equipped with the keyless operation system, refer to “Keyless
operation system: Steering whe ...