Subaru Forester: Vehicle load limit – how to determine - Tire information - Consumer information and Reporting safety defects - Subaru Forester Owner's ManualSubaru Forester: Vehicle load limit – how to determine

The load capacity of your vehicle is determined by weight, not by available cargo space. The load limit of your vehicle is shown on the vehicle placard attached to the driver’s side B-pillar. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard.

The vehicle placard also shows seating capacity of your vehicle.

The total load capacity includes the total weight of driver and all passengers and their belongings, any cargo, any optional equipment such as a trailer hitch, roof rack or bike carrier, etc., and the tongue load of a trailer. Therefore cargo capacity can be calculated by the following method.

Cargo capacity = Load limit − (total weight of occupants + total weight of optional equipment + tongue load of a trailer (if applicable)) For information about vehicle loading, refer to “Loading your vehicle”.

For information about towing capacity and weight limits, refer to “Trailer towing”.

    Tire care – maintenance and safety practices
    - Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear. - Inspect the tire tread regularly and replace th ...

    Calculating total and load capacities varying seating configurations
    Calculate the available load capacity as shown in the following examples: Example 1A Vehicle capacity weight of the vehicle is 900 lbs (408 kg), which is indicated on the vehicle placard ...

    See also:

    Back–Up Lamp
    Removal of the lamp assembly is not required to replace the back-up lamp bulb. To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim acces ...

    Door interlock switch
    Door interlock switch 1) Door interlock switch Although the map light switches (lenses) are in the OFF position (manually off), the map lights can be set to illuminate automatically in con ...

    Maintenance
    • Use a screw driver to open the caps or cover and a flashlight to inspect the level. • If necessary, add distilled water. The level should never be above the indicator. • The fluid level ...