Volvo XC60: Turn signals
Turn signals
When changing lanes
1 The driver can automatically flash the turn signals 3 times by moving the turn signal lever up or down to the first position and releasing it.
When turning
2 Move the lever as far up or down as possible to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.
NOTE
• This automatic flashing sequence can
be interrupted by immediately moving
the lever in the opposite direction.
• If the turn signal indicator flashes faster
than normal, check for a burned-out
turn signal bulb.
Hazard warning flashers
Location of the hazard warning flasher button The hazard warning flasher should be used to indicate that the vehicle has become a traffic hazard. To activate the flashers, press the button i ...Interior lighting, front
Light switches, front roof lighting 1 Drivers side front reading light, on/off. 2 Passenger's side front reading light, on/off. 3 Overhead courtesy lighting. The lighting in the front part of th ...See also:
Weight of the Trailer Tongue
The tongue load (A) of any trailer is an important weight to measure because
it affects the total gross weight of the vehicle. The Gross Vehicle Weight (GVW)
includes the curb weight of the vehicl ...
Warnings and indicators
Warning lights / audible indicators Checking operation All warning lights are
checked by turning the ignition switch ON (do not start the engine). Any light that
does not illuminate should be chec ...
Tire chains
Tire chains, if necessary, should be
installed on the front wheels. Be sure
that the chains are installed in accordance
with the manufacturer's instructions.
To minimize tire and chain wear, d ...