Honda CR-V: To Play a USB Flash Memory Device

This audio system can operate the audio files on a USB flash memory device with the same controls used for the in-dash disc changer. To play a USB flash memory device, connect it to the USB adapter cable in the upper glove box, then press the CD/ AUX or AUX button.

The audio system reads and plays the audio files on the USB flash memory device in MP3, WMA or AAC* formats. Depending on the format, the display shows MP3, WMA or AAC when a USB flash memory device is playing. The USB flash memory device limit is up to 700 folders or up to 65535 files.

*: Only AAC format files recorded with iTunes are playable on this audio unit.

The recommended USB flash memory devices are 256 MB or higher, and formatted with the FAT file system. Some digital audio players may be compatible as well.

Some USB flash memory devices (such as devices with security lockout features, etc.) will not work in this audio unit.

NOTE:

Do not use an extension cable to the USB adapter cable equipped with your vehicle.

Do not connect your USB flash memory device using a hub.

Do not use a device such as a card reader or hard drive as the device or your files may be damaged.

Do not keep a USB flash memory device in the vehicle. Direct sunlight and high heat will damage it.

We recommend backing up your data before playing a USB flash memory device.

Some devices cannot be powered or charged via the USB adapter. If this is the case, use the accessory adapter to supply power to your device.

Depending on the software the files were made with, it may not be possible to play some files, or display some text data.

Depending on the type and number of files, it may take some time before they begin to play.

The specifications for compatible MP3 files are:

Sampling frequency:
32/44.1/48 kHz (MPEG1)
16/22.05/24 kHz (MPEG2)
Bitrate:
32/40/48/56/64/80/96/112/128/160/192/224/256/320/VBR kbps (MPEG1)
8/16/24/32/40/48/56/64/80/96/112/128/144/160/VBR kbps (MPEG2)
Supported standards:
MPEG1 Audio Layer3
MPEG2 Audio LSF Layer3
Partition: Top partition only
Maximum layers: 8

The specifications for compatible WMA files are:

Sampling frequency:
32/44.1/48 kHz
Bitrate:
48 - 320/VBR kbps (Max 384)
Supported standards:
WMA version 7/8/9
Maximum layers: 8
Partition: Top partition only

The specifications for compatible AAC files are:

Sampling frequency:
8/11.025/12/16/22.05/24/32/44.1/48 kHz
Bitrate:
8 - 320 kbps
Supported standards:
MPEG4/AAC LC
MPEG2/AAC LC
Partition: Top partition only
Maximum layers: 8

Combining a low sampling f requency

Combining a low sampling f requency with a low bitrate may result in extremely degraded sound quality.

NOTE:

In WMA or AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the audio unit displays UNPLAYABLE FILE, and then skips to the next file.

READ NEXT:

 Connecting a USB Flash Memory Device

1. Open the upper glove box. 2. Push the release button to release the USB adapter cable. 3. Connect the USB flash memory device to the USB connector correctly and securely. When the

 Text Data Display Function

Each time you press the TITLE button, the display mode shows you in sequence, the folder name, the file name, the artist name, the album name, the song name, or name off (which turns off the

 To Change or Select Files

Use the SKIP button while a USB flash memory device is playing to change files. SKIP - Each time you press the (SKIP +) button, the system skips forward to the beginning of the next file.

SEE MORE:

 Parking Tips

Make sure the moonroof (if equipped) and the windows are closed. Turn off the lights. Place any packages, valuables, etc. in the cargo area or take them with you. Lock the doors and the tailgate. If equipped Check the indicator on the instrument panel to verify that the security syst

 DTC 91: VSA System

1. Check the brake system for leaks or mechanical problems. Is the brake system OK? (No brake fluid leakage, no air trapped in the brake system, no brake pads worn out.) YES-Go to step 2. NO-Repair the brake system, then recheck. 2. Turn the ignition switch ON (II). 3. Clear the DTC with the HDS

© 2016-2024 Copyright www.hcrv.net