Volvo XC60: Switching HD on or off
The factory setting for HD radio is off. However, when driving through areas with weak HD signals (fringe areas), you may experience that the radio repeatedly switches between analogue/ digital and digital/analogue reception. If this happens, it may be desirable to switch HD off. To do so:
1. Be sure the audio system is switched on and in one of the AM or FM modes.
2. Press OK/MENU in the center console control panel.
3. Turn TUNE and move the marker to HD Radio.
4. Press OK/MENU to turn HD off (the X will disappear from the box on the display screen).
This will disable the radio's capability to receive digital broadcasts but it will continue to function as a conventional (analogue) AM/FM receiver. Please note that when HD is switched off, it will not be possible to tune to sub-channels (see the following section for a more detailed explanation of sub-channels).
Repeat steps 2-4 above to reactivate HD (an X will appear in the box on the display screen).
Please note that this will only switch HD on or off for the selected waveband (AM, FM1, etc.).
Limitations
• Main channel vs. sub-channels (FM
only): The main channel is the only channel
that can receive in hybrid mode (both digital
and analogue). If a frequency has subchannels,
they are broadcas ...
Sub-channels
Example of an HD Radio station with sub-channels
In many cases, a main HD Radio station (FM
wavebands only) will also have sub-channels
offering additional types of programming or
music.
In ...
See also:
End a Call
Push . System responds: “Call ended.” ...
Important safety notes
WARNING
When operating the climate control, the air that enters the passenger compartment
through the air vents can be very hot or very cold (depending on the set temperature).
This could ca ...
Brakes
*1: Minimum pedal clearance when depressed with a force of 110 lbf (490 N,
50 kgf) while the engine is running
*2: Parking brake lever travel when pulled up with a force of 45 lbf (200 N, 21
kgf) ...